Products
AUDIO

Public address amplifier 4x 200W

Send to a friend
Print
DETAILS
Public address amplifier with 4 channels and 200W rms per channel available. This amplifier features 4 independent balanced inputs with independent volume controls, each input in Jack 6.5mm and 4 outputs in 100V line transformer with binding-post plus shot circuit protection for better performance on both fixed and mobile installations.
SPECIFICATIONS
- Public address amplifier
- 4 channels, 200W rms per channel
- Independent volume control per channel
- Balanced inputs in Jack ¼''
- Outputs in binding-post
- 100V line transformer output
- Frequency response: 50Hz - 15kHz
- T.H.D. <0.02% @ 1kHz
- Short circuit protection
- 3 unit Rack 19'' mountable
- Mains supply: 230V AC / 50Hz
GALLERY
PA4Z800_2
PA4Z800_1
Related products
Public address amplifier, 6 zones / 300W
Public address amplifier with 6 channels and 300W rms available featuring 6 independent zones and each zone with a on/off switch plus 2 Line inputs in RCA connectors. All inputs are balanced in Jack 6.5mm, outputs in both low impedance and 100 line transformer and another REC/SLAVE output in RCA. The...
Audio > PA amplifiers
Exponencial horn 30W in ABS - 100V out
Exponencial horn with 30W rms driver coupled, lightweight and with 100V line transformer output. This Horn has a rear switch that allows to choose 6 different power steps as well as the output type for 8Ohm or 100V line output.
Audio > Horns
Public address speaker, 5" + tweeter 1"
‘’Full Range’’ speaker ideal for public address applications built in high density PVC and compact construction. This Studio5 speaker is lightweight and features a 5" loudspeaker + 1" tweeter with great audio performance. On the real panel there is a selector to choose between 4 different...
Audio > PA speakers
Back Top
Verification code: